Resetting the PEQ Camera


Ensure that the ethernet cable is connected to the iPeq Camera and the other end is connected to the open port of the white Y dongle.

The other end of the white Y dongle should be connected to the LAN port of the HUB.

Make sure the power adapter is connected to the white Y dongle and to a live power outlet.

On the back side of the Peq Camera, there is a small black button.  Hold this button down for 30 seconds to restore the camera to default settings.  DEFAULTING THE CAMERA WILL REQUIRE IT TO BE REPAIRED TO THE HUB.

When the center LED (power) and the left most LED (network) are lit and stable, the camera is ready to be added to your PEQ system.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Powered by Zendesk