Resetting a Kwikset Door Lock


If you want to reset your Kwikset Door Lock back to factory settings, please be aware that doing so will delete all codes associated with the door lock.

  • Remove Battery Pack
  • Pess and Hold the Program button while reinserting the battery pack.  Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.
  • Press the Program button once more.  When the LED flashes green and you hear one beep, the lock has been reset.

For a quick way to check whether or not the reset process worked, you can press the lock button when the door is open. If the latch does not extend, the lock has been reset.

In order to get your Kwikset Door Lock to work with your hub, you will need to go back through the activation steps and the pairing (inclusion process).

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Powered by Zendesk