Resetting the Motion Sensor

Follow

To reset your motion sensor, just follow the simple steps below.

1. Take off the cover of the motion sensor

2. Remove the battery

3. Use a small object (like a pencil eraser, or the end of a cotton swab) and push down on the reset button (small silver button in a triangular opening next to the battery)

4. While pushing down on the reset button, re-insert the battery
a.) The light on the sensor will be orange.

5. Put the cover back on
a.) The light on the sensor should be blue and blink 3 times to indicate the sensor is ready to pair.

6. Follow the on-screen, step-by-step instructions to pair, name, and test the sensor

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Powered by Zendesk